Key technical points for using the brush cutter

Key technical points for using the brush cutter machine

The others stayed away from the lawn mower. 

During the operation of the lawn mower, apart from the person operating the mower, there should be no one near the mower. Although the lawn mower can be controlled, sometimes the lawn is rather slippery. The friction between the lawn mower and the ground is relatively small on such slippery ground, which makes it easy for the lawn mower to detach. Therefore, during the mowing process, it is necessary to avoid having anyone standing around the mower, so as to prevent any injuries to others. 

2. All components are installed completely. 

When using the lawn mower, make sure to install all the components of the mower properly, especially since many lawn mowers have protective covers with blades. During use, it is essential to install the protective cover correctly. Once it is installed properly, it can prevent the motor from being burned out due to the rope going beyond the installation range. 

3. When the environment is particularly humid, do not use the lawn mower. 

When using a lawn mower, if the grass is very wet, it is best not to use the mower. Especially if it has rained recently or if the lawn has just been watered, if you use the mower at this time, the ground will be very slippery and it might be difficult to control the mower stably. Therefore, it is best to mow the lawn on a sunny day. 

4. Regularly clean the interior of the lawn mower 

During the operation of the lawn mower, it is necessary to regularly clean the interior of the machine. Because as the lawn mower is used for a long time, there will inevitably be some small pieces of grass inside. If these small pieces are not cleaned for a long time, they will easily affect the lifespan of the motor. Therefore, after the lawn mower has been used for a period of time, it should be cleaned regularly inside. 

5. Protect the blades of the lawn mower properly 

When using the lawn mower, it is essential to protect the blade of the machine. During the mowing process, there are some very dense grass that may block the blade. At this time, you should firmly lift the front end of the lawn mower and simultaneously turn off the power of the mower. This way, it is less likely to damage the motor of the lawn mower. 

6. Control the speed of mowing the grass properly 

When using the lawn mower, it is essential to control the cutting speed properly. If the grass is very dense during the mowing process, you must reduce the cutting speed. Do not go too fast. If the grass is not particularly dense, you can slightly increase the cutting speed. 

7. Avoid Contacting Other Hard Objects

When using the lawn mower, to prevent damage to certain parts of the mower, never allow the mower to come into contact with any hard objects. For example, during the mowing process, you might encounter stones or flower pots. In such cases, be sure to avoid these objects while mowing. 

8. Pay attention to storage 

During the operation of the lawn mower, if the mower has been used up, it is necessary to properly store the mower. One should choose a dry and well-ventilated place to place the mower, as this will prevent damage to the various parts and components of the mower. 

9. The engine of the lawn mower is difficult to start. There could be the following reasons for this: 

a. No gasoline - Solution: Add gasoline. 

b. Spark plug wiring detachment - Solution: Reconnect the spark plug wire. 

c. The accelerator switch is not in the starting position - Solution: Adjust the accelerator switch to the maximum position. 

d. Oil passage blocked - Solution: Clean the oil passage. 

e. Ignition misalignment - Solution: Adjust the ignition timing. 

f. Spark plug damage - Solution: Replace with a new spark plug. 

g. Using poor-quality or deteriorated gasoline - The solution is to use the correct grade of gasoline.