Maintenance and upkeep of blower
Release Time:
Dec 24,2025
Fuel, empty the fuel tank, and clean the carburetor and piping by running the machine until it stops due to a lack of fuel.
maintenance
Once every 10 hours
1. Open the air filter cover and remove the cover and filter element.
2. Check the components. If the component is deformed or damaged, replace it with a new one.
3. Clean the filter element and cover with gasoline, and squeeze and blow dry.
Once every 15 hours
1. Use a spark plug wrench to remove the spark plug
2. Clean and adjust the spark plug gap to 0.6-0.7mm. Replace any damaged or visibly worn spark plugs with Champion RCJ6Y or equivalent products.
3. Install the spark plug on the cylinder head and tighten it with a spark plug wrench. If there is a torque wrench, adjust the spark plug torque to 148-165 inch pounds.
Once every 50 hours
Check the entire machine and pipeline for damage, including loose or missing components, and repair as needed.
Replace the spark plug with Champion L9T (LD) spark plug with a gap of 0.6-0.7mm.
Use a wire hook to remove the fuel tank filter, then remove the filter element and clean it with gasoline. Before reinstalling the filter, check the condition of the fuel pipe. If damage or deterioration is found, use should be stopped until inspected by trained repair technicians.
store
Clean thoroughly the exterior of the machine.
Fuel, empty the fuel tank, and clean the carburetor and piping by running the machine until it stops due to a lack of fuel.
Lubricate, remove the spark plug, and then pour approximately 1/4 ounce of oil into the cylinder through the spark plug hole. Before reinstalling the spark plug, pull the recoil starter 2 to 3 times to distribute the oil on the cylinder wall.
Disassemble, clean, and reinstall the air filter element according to the instructions.
Related News
Links
Contact Us
Global Center,Lanshan District,Linyi city,Shandong,China
PLEASE INQUIRE