Operating Instructions for the Leaf Blower

Operating Instructions for the Leaf Blower

I. Personal Protection

1. Must wear goggles, dust mask, soundproof earplugs, anti-slip gloves, and tight-fitting clothes. Avoid loose clothing.

2. Tuck in long hair, do not wear accessories, and do not work barefoot or in slippers.

II. Pre-operation Inspection

1. Check for any damage or air leakage in the oil pipe, filter, and air duct. Ensure all screws are tightened.

2. For two-stroke models, strictly follow the 50:1 fuel ratio. Do not use pure gasoline or inferior oil.

3. Confirm that the air duct is securely installed, and the switch and throttle operate smoothly.

4. Clear the operation area and avoid debris such as stones, glass, and hard objects.

III. Operating Procedures

1. Turn on the fan when the engine is cold. Fully open the throttle when the engine is hot. Preheat at idle speed before normal operation.

2. Hold the machine firmly with both hands.倾斜 the air outlet downward. Do not face it directly at people， animals， or doors and windows.

3. Work with the wind in the same direction. Working against the wind may cause dust to fly and irritate the eyes and inhaled dust.

4. Clean up debris gradually. Do not operate at full load and high speed for a long time.

5. Stand firm and hold on when cleaning at heights. Do not work at dangerous positions.

IV. Safety Prohibitions

1. Do not operate after drinking alcohol， being fatigued， or when in poor health.

2. Do not blow air towards power lines， flammable materials， or flammable and explosive areas.

3. Do not modify the throttle， change the speed， or disassemble the engine core without authorization.

4. Keep children and unrelated personnel away from the operation area.

5. Do not use when there is heavy dust， heavy fog， or strong wind.

VI. Post-Operation Maintenance

1. Cool down the machine before storage and add fuel.

2. Clean the dust on the machine body and air ducts， and clean the air filter.

3. Check if the impeller is stuck or worn. Timely troubleshoot any abnormal sounds.

4. Drain the fuel if the machine is stored for a long time. Protect the machine from rust and dust.

5. Regularly replace the engine oil to ensure smooth power.

VII. Emergency Handling

If there is abnormal noise， vibration， or oil leakage， immediately shut off the engine and stop using it. Troubleshoot the problem before using it. Do not operate with a faulty machine.