Problems to be noted before using the hedge trimmer

Problems to be noted before using the hedge trimmer

1. Before using the hedge trimmer, please carefully read the user manual to understand the machine's performance and usage precautions.

2. The purpose of the hedge trimmer is to trim hedges and shrubs. To avoid accidents, it should not be used for other purposes.

3. The hedge trimmer is equipped with a high-speed reciprocating cutting blade. If the operation is incorrect, it is very dangerous. Therefore, do not use the hedge trimmer when you are tired, after taking an感冒 medicine, or after drinking alcohol.

4. The exhaust gas emitted by the engine contains harmful carbon monoxide. Therefore， do not use the hedge trimmer in places with poor ventilation such as indoors， greenhouses， or tunnels.

5. Do not use it in the following situations： 

When the ground is slippery and it becomes difficult to maintain a stable working posture. 

② When there is heavy fog or at night, it becomes difficult to confirm the safety around the work site. 

③ When the weather is bad (such as when it's raining, there's strong wind, or there's thunder, etc.). 6. When using the hedge trimmer for the first time, it is essential to have an experienced person guide you on its usage before you can start the actual operation.

7. Excessive fatigue can reduce attention, which can be a cause of accidents. Do not make the operation plan too tight. Do not exceed 30 to 40 minutes of continuous operation at a time, and then have a 10 to 20-minute break. The total operation time for a day should be limited to within two hours.

8. Minors are not allowed to use the hedge trimmer.

9. Before starting the operation, you need to understand the situation on the site (terrain, nature of the hedge, location of obstacles, surrounding danger level, etc.), and remove any movable obstacles.

10. With the operator at the center, the area within a radius of 15 meters is considered a dangerous zone. To prevent others from entering this area, use ropes to enclose it or erect warning signs. Additionally, when several people are operating simultaneously, they should greet each other from time to time and maintain a certain safe distance.

11. Before starting the operation, carefully inspect all parts of the machine. Only start the operation after confirming that there are no loose screws, oil leakage, damage or deformation. Pay special attention to the blades and the connection parts of the blades.

12. Only use the blade after confirming that it is not chipped, cracked or bent. It is strictly forbidden to use a blade that has shown any abnormalities.

15. After tightening the screws and installing the blade, first rotate the blade by hand to check for any up-and-down movement or abnormal sounds. If there is up-and-down movement, it may cause abnormal vibration or loosening of the blade fixation part.