The correct method for using an chainsaw

Release Time:

Apr 29,2026

The correct method for using an chainsaw

1. Pre-start preparation: Before starting the chainsaw, remember not to pull the start cord too hard to avoid damage. When starting, gently pull the start handle until it reaches the preset stop position, then quickly and forcefully pull it while pressing down on the front handle and ensuring that the start handle does not spring back freely.

2. Chainsaw type and oiling operation: The common chainsaws on the market require filling the fuel tank with 251 number gasoline engine oil. On the right side of the carburetor, there is an oil pump that needs to be pressed until gasoline flows out.

3. Start and idle: The chainsaw uses a pull-line start method. After starting, let the chainsaw idle for about one minute to check if it is running normally. During the start and idle process, always maintain a safe distance to avoid getting close to the rotating parts.

4. Cutting operation: After starting the chainsaw, align it with the object to be cut. During the cutting process, maintain a certain direction and stability. When you notice a decrease in engine power, it may be due to a dirty filter inside. At this time, stop the machine to clean it.

5. Safety precautions: Before each start, perform an idle check to ensure normal rotation. During the operation, always keep your hands and body away from the front of the chainsaw to ensure safety.

6. Troubleshooting: When the chainsaw has difficulty starting or operates abnormally, you can try removing the spark plug, pressing the port with your thumb and pulling the start handle several times to remove excess fuel in the cylinder. Wait for the spark plug to dry before reinstalling it and try starting again.

In conclusion, using and maintaining a chainsaw correctly not only improves work efficiency but also ensures operational safety. During use, always follow the instructions and perform regular checks and maintenance on the chainsaw.