Leave the brush cutter idle. Remember to debug it before using it again!

Leave the brush cutter idle. Remember to debug it before using it again!

After being idle for half a year, it still remains as sharp as new!

Prohibited Red Line! These behaviors are absolutely forbidden!

Before discussing maintenance, first cross out the mistakes that 90% of people tend to make! Don't step on the trap, otherwise the machine will "break down" in front of your eyes at any moment:

❌ Blindly add engine oil! Absolutely not to add engine oil directly to an air-cooled engine! Don't mix the oil for four-stroke and two-stroke engines. Adding too much will directly cause carbon deposits, and adding too little will lead to cylinder seizure. You won't even have time to cry!

❌ Use inferior oil! Cheap brand gasoline costs only a few dollars and is the most damaging to the machine. It can also easily cause blockage in the oil passage.

❌ Forceful operation! When encountering stones or hard tree roots, just go around! Don't use the machine as a hammer. If the blade is broken or the cylinder body is damaged, there will be no place to repair it.

❌ Shut off the engine immediately after hot start! After the operation, let it idle for 1 minute to cool down before turning off. Otherwise, the high temperature will cause carbon deposits, and the machine's lifespan will be reduced by half!

❌ Remove the protective cover! It is a life-saving shield. Remove it not only to damage the machine but also to easily break off debris that can injure people. Never try to be lazy!

✅ Secret Tips for Long-term Storage! Even after being idle for 1 month, there is no problem!

If your lawn mower has not been used for more than 1 month, follow these steps to give it a "hidden protective suit":

1️、Fuel "Disposal"

Either completely empty the gasoline in the fuel tank or add a professional fuel stabilizer. Don't let the gasoline stay in the tank for an entire winter. It will deteriorate and become the "poison" for the machine.

2️、Oil "Renewal"

Before storage, it is best to clean the old oil thoroughly. Replace it with new oil before the next use. This step is crucial for preventing the aging and corrosion of internal components!

3️、Whole Machine "Take a Bath"

Use a cloth to wipe the grass, dirt, and debris off the surface of the machine, especially around the heat sink and air filter. Dry all the moisture and place it in a dry and ventilated warehouse to give it a comfortable "home".

4️、Core Protection! Give the cylinder "Oil SPA"

This is the most important step! Remove the spark plug, drip a few drops of special engine oil into the cylinder, and then gently pull the starter. Let the oil evenly coat the cylinder wall. This way, it will never rust no matter how long it is stored!

Finally, I would like to say:

Just like a person, if you treat the machine well, it will treat you well. Developing these good habits can not only save a lot of maintenance costs but also make it work efficiently in critical moments!