COMPANY NEWS_Linyi Chaoyue Machinery Co.,Ltd.

15

2026-06

The reasons for the insufficient power of the brush cutter

Clean the air filter and remove debris from the blade head → 2. Replace the new fuel, check the fuel mixing ratio → 3. Check if the throttle is fully open If ineffective: Inspect the spark plugs → Clean the carburetor, clean the muffler Still unable to operate: Check the clutch, gearbox → Finally inspect the internal engine

Jun 15,2026

The reasons for the insufficient power of the brush cutter

12

2026-06

Analysis of Causes for Insufficient Power in Brush Cutter

- Replace with fresh fuel and verify correct two-stroke oil mixing ratio - Clean or replace air filter - Inspect, clean, or replace spark plug - Clear blocked fuel tank vent, fuel lines, and exhaust carbon deposits - Disassemble and clean carburetor and fuel filter - Check blades, clutch, belt, and transmission components - Test cylinder compression pressure and inspect four-stroke valve condition

Jun 12,2026

Analysis of Causes for Insufficient Power in Brush Cutter

12

2026-06

The reasons for the black smoke emitted by the chainsaw

Jun 12,2026

The reasons for the black smoke emitted by the chainsaw

11

2026-06

Why does the chainsaw get stuck?

Strictly mix the two-stroke engine oil in the prescribed ratio, and strictly prohibit the use of pure gasoline; Check the chain supply of oil before each operation, regularly clean the oil holes of the guide plate and the heat sink; Reasonably adjust the tightness of the chain, avoid clamping the wood when cutting, and make multiple cuts for thick wood; Before long-term storage, empty the fuel, apply oil to the moving parts, and place it in a dry place.

Jun 11,2026

Why does the chainsaw get stuck?

10

2026-06

Analysis of the Reasons for the Decrease in Flow Rate of the Power Sprayer

Jun 10,2026

Analysis of the Reasons for the Decrease in Flow Rate of the Power Sprayer

10

2026-06

The Importance of Maintenance for Brush Cutter

Following the required maintenance schedule can maintain the original factory performance of the equipment. For some models, regular maintenance is also a prerequisite for retaining warranty rights. Using the equipment improperly or neglecting maintenance will directly result in losing the warranty eligibility.

Jun 10,2026

The Importance of Maintenance for Brush Cutter

09

2026-06

Reasons for insufficient power of the chainsaw and troubleshooting methodsI.

Clean the air filter and cooling fins， check if the wind gate is fully open Replace with qualified fresh mixed oil， check the fuel pipe and fuel tank filter Check， clean or replace the spark plugs Clean the carbon deposits in the muffler and exhaust passage Check the tension and sharpness of the chain and the supply of chain oil If ineffective， clean and debug the carburetor If still powerless， disassemble and inspect the cylinder pressure， internal components

Jun 09,2026

Reasons for insufficient power of the chainsaw and troubleshooting methodsI.

09

2026-06

Reasons for the decrease in the flow rate of the power pump

Quick troubleshooting steps (in order, time-saving and efficient) Check the water intake pipe, filter, and bottom valve, eliminate blockages, leakage, and bent pipes Confirm the suction height, water outlet valve, and pipeline status Motorized model: Check engine speed, air filter, fuel, spark plugs; Electric model: Measure voltage, check starting capacitor Remove the pump body, clean the impeller entanglements, add water If ineffective, check the impeller, sealing parts, belt / transmission structure

Jun 09,2026

Reasons for the decrease in the flow rate of the power pump

08

2026-06

The Importance and Practical Points of Regular Lubricant Replacement for Brush Cutter Gearboxes

Too much grease： The machine becomes dull， power decreases， and the oil seal leaks. Remove the excess grease. Grease turns white， becomes thinner， or gets water： Immediately replace all of it， and check if the oil seal is damaged. Long-term idle： Before storage， replenish the lubricating grease to avoid exposed parts rusting； before restarting， check the grease condition.

Jun 08,2026

The Importance and Practical Points of Regular Lubricant Replacement for Brush Cutter Gearboxes

08

2026-06

The correct usage method of a two-stroke gasoline engine

Mix oil in proportion, close the fan valve in cold engine, fully open the fan valve in hot engine, do not idle or stall the engine, frequently clean the air filter and silencer.

Jun 08,2026

The correct usage method of a two-stroke gasoline engine

< 1...4 5 6...15 >

Links

Contact Us

cywiner01@cnbrushcutter.com

+86-15305395628

Global Center,Lanshan District,Linyi city,Shandong,China

PLEASE INQUIRE

Powered by:300.cn | SEO

Business License

WhatsApp：8615305395628

e-mail：cywiner01@cnbrushcutter.com

tel：+86-15305395628